Brisbane Crystal View Fully Polycarbonate Shutter

Ultimate Visibility — Exceptional Springing — Easy Operation

The Crystal View Full Polycarbonate Roller Shutter gives the ultimate in visibility for your shopfront doors and shutters. Designed to suit openings up to 3.5m high and up to 3.0 metres wide in a single span. Multiple doors may be used in wider openings. The Crystal View as supplied by Prestige Door Services is designed to clearly enable visibility of your products whilst providing a high level of security and an ultra modern look:

Recommended Application

The Crystal View Polycarbonate Roller Shutter is suitable for the following commercial applications: Shopping Centres, Arcades, Sporting Complexes, Clubs, Bars and counter Tops

Curtain

The Crystal View curtain is constructed from interlocking Clear Polycarbonate extrusions. Both ends of each alternate slat are fitted with specially shaped nylon moulded end clips to reduce friction during operation and prevent lateral movement within the guides.

Curtain Options Available

Slotting of polycarbonate slats is available 95mm x 25mm @ 70mm spacings where ventilation is required.

Side Guides

Are 50mm x 30mmAluminium extrusions which can be fitted with a rubber twin fin extrusion or mohair felt buffer for quieter operation. All manual doors are supplied with stops .

Locking

Can be fitted to all doors. Locking is centrally mounted within either a mid rail at approx 900mm AFFL or within the Bottom Rail.

LOCKING IS NOT RECOMMENDED WHERE DOORS ARE MOTORISED

Operation

The Crystal View can be either manually operated by hand or electrically operated. There is a wide range of control methods available with motorized doors and these can be discussed

Roller Drum

Is fabricated from 229mm spiral ducted tube or 229mm spiral welded tube depending on operation. The assembly rotates on a 34mm steel shaft which is fitted with helical springs designerd to counterbalance the weight of the doors throughout the doors operation cycle. These springs are designed to achieve a door which is easy to lift.

Motorisation Methods

The Crystal View Polycarbonate shutter can be motorized with the use of a centrally mounted drum motor in low use areas. Consult manufacturer for actual details

Size

The Crystal View Roller Shutter is suitable for openings up to 3.0mtrs wide and up to 3.5 mtrs high

Finish

The Crystal View Shutter Bottom Rail, Guides and Mid Rail are supplied standard in a Clear Anodised finish (Matt Natural), but can be powder coated as an option (Price available on request).